‘Use Manual Occupancy Data’ option Last updated Save as PDF Serraview Only Configuration The below configuration option can be found in the 'Serraview Locator Configuration' section. The section will only be visible if your instance has the 'Locator' module enabled, and you have the required secured action. You can configure the Locator to use Manual Occupancy data from Serraview's Configuration module. Set the Use Manual Occupancy Data Navigate to Admin Settings > System Config > General > Serraview Locator Configuration. Check the Use Manual Occupancy Data check box. Click the Update button. Set the Do Not Use Utilization Data for Room Availability Navigate to Admin Settings > System Config > General > Room Booking Locator Configuration. Check the Do Not Use Utilization Data for Room Availability check box. Click the Update button.
The section will only be visible if your instance has the 'Locator' module enabled, and you have the required secured action. You can configure the Locator to use Manual Occupancy data from Serraview's Configuration module. Set the Use Manual Occupancy Data Navigate to Admin Settings > System Config > General > Serraview Locator Configuration. Check the Use Manual Occupancy Data check box. Click the Update button. Set the Do Not Use Utilization Data for Room Availability Navigate to Admin Settings > System Config > General > Room Booking Locator Configuration. Check the Do Not Use Utilization Data for Room Availability check box. Click the Update button.
