Skip to main content
Eptura Knowledge Center

SVLive2 Implementation

Use the following list to ensure you have completed the implementation.

The SVLive minimum requirements for the Serraview Switch Scanning Service and the Serraview Presence Service, are found in the Operating Environment article.

No.

Item

Prerequisites

Responsible

1

Floorplans - Submit New CAD Floorplans

None

Client

2

Floorplans - Drafting and Mapping

  • The Serraview Support team completes the drafting and mapping of floorplans in Serraview.

Floorplans - Submit New CAD 

Serraview Support team

3

Floorplans - Set up Workpoints and Spaces

  • Configure workpoints and spaces to show availability in Locator. You can use the Workpoint Import to update the workpoint and space's availability, refer to Workpoint Import and Locator.

Floorplans - Drafting and Mapping

Client

4

Client Infrastructure - Network Rules

None

Client Networks team

5

SVLive2 Configuration - Floor Level Switches

None

Client Networks team

6

SVLive2 Installation

SVLive Presence Service (SPS) Installation

Switch Scanner Installation

Steps 1 to 5 Client IT

7

Wi-Fi

SVLive obtains Wi-Fi data from Serraview's Wi-Fi Location Service.

  • Map Wi-Fi access points including BSSIDs against floorplans within Space Planning. For more information on WAP mapping, refer Serraview Wi-Fi Overview.

Floorplans

Client IT / Client Property

8

Wire up - Test and Validate

Serraview's Wireup Tool allows non-technical auditors to quickly and accurately audit locations to connect (or "wire-up") switch ports to their physical locations. Before you schedule the wire up, test the wire up of one desk per floor and validate the switch details. For information on the wire up configuration and prerequisites, review the entire section of SVLive and Wireup Configuration.

Use the Wire-up Workpoints Manual - Checklist to ensure you are ready to send your auditors out to wire-up a space.

Wire up - Workpoints Manually

Complete the wire up for all workpoints on each new floor. For information on how to wire up the workpoint manually and the prerequisites, review the entire section of Wireup Workpoints Manually. Also, you can watch the Using the Wire-up Tool Video.

Floorplans and Switches

Client IT / Client Property