Update the Lease Rentable Area
Level: Administrator
Overview
The Space Module will calculate the BOMA-derived rentable areas at the floor, building, and space levels, and it shows Lease Rentable Area (LRA) at the building level.
How to choose a BOMA Method
BOMA (Building Owners and Managers Association) standards dictate how common area square footage is distributed to occupants. Both methods produce the same total rentable area for the building (to within rounding). They differ in how that total is spread across spaces.
- Method A - Dual Ratios (Multiple Load Factor) - Allocates in two steps. Each floor first gets its own floor allocation ratio based on that floor's common areas. A building-wide Building Allocation ratio is then applied to spread building-level common areas (such as a main lobby, building service areas, base building circulation, and building amenities). Spaces on floors with more common areas carry a higher factor.
- Method B - Single Load Factor - Combines all common areas into one building-wide Load Factor. Every occupant in the building uses the same multiplier, regardless of floor.
Method A is more precise for multi-tenant buildings where floors have different amounts of common area. Whereas Method B is simpler and more uniform.
You will need to choose a method that matches how the lease allocates common space.
Prerequisites
Before you set the BOMA method, ensure the following are in place:
- Floors
Each floor needs its Interior Gross Area populated.
- Space
A space's area is derived from its polyline on the floor plan and cannot be edited on the space. A space without a polyline has no area, so it adds nothing to Occupant Area or Rentable Area.
- Classifications
Eptura Workplace uses the existing space classifications to place each space into a BOMA area type. Classifications come from the space type; they cannot be changed on individual spaces. For the BOMA calculation to work correctly, you must complete the space classifications, learn more in Add, Edit, or Delete Space Types.
| BOMA Area Type | Eptura Workplace Classification | How it is used |
|---|---|---|
| Tenant Area | Occupant Area, Office Area, Tenant Area, Secondary Circulation, Storage Area | Counts toward Occupant Area and receives a space-level Rentable Area |
| Tenant Ancillary Area | Tenant Ancillary Area | Counts toward Occupant Area |
| Floor Service Area | Floor Common, Floor Service, Primary Circulation, Interior/Perimeter Encroachment | Floor-level common area, included in Floor Rentable Area |
| Building common areas | Building Common, Building Service, Inter Building Service, Base Building Circulation, Amenity Area (Building), Inter Building Amenity Area | Building-level common area. Method A allocates it through the Building Allocation ratio. Method B includes it in the single Load Factor. |
| Vertical Penetrations | Building Core, Major Vertical Penetration, Vertical Penetration, Void Area | Subtracted from Interior Gross Area (not rentable) |
| Rentable Exclusions | Excluded Area, Rentable Exclusions, Restricted Headroom, Building Projections | Subtracted from Interior Gross Area (not rentable) |
| Unclassified | No classification assigned | Left out of all calculations. The space shows a blank Rentable Area and a warning. |
View the Building's information
You can display the building's information such as Exterior Gross Area, Interior Gross Area, Lease Rentable Area, Rentable Area, and so much more.
- Click the Mode
icon and select Admin. - Navigate to the building.
- Click the Information tab.

Set the Building's BOMA method
When you have the Building selected, you can determine how common areas are allocated by setting the BOMA Methods.
- From the BOMA Method drop-down, select either: None, Method A - Dual Ratios, or Method B - Single Load Factor.

- The message displays 'Changing the BOMA method marks calculated area as out of date. Recalculated when you are ready to update space rentable areas.'
- Click the Confirm button and the BOMA Method is saved.
Method A - Dual Ratios
In this example, Method A - Dual Ratios was selected.
Click the Recalculate button to refresh the space rentable areas using the current method and load factor.

Method B - Single Load Factor
In this example, Method B - Single Load Factor was selected.
Click the Recalculate button to refresh the space rentable areas using the current method and load factor.

View the Floor's BOMA Derived Areas
Select the floor and the BOMA Derived Areas displays the following:
- Floor rentable area (BOMA Derived) - Calculated from Interior Gross minus Vertical Penetration and Rentable Exclusions. Method A also excludes builidng-common area.
- Occupant area - Sum of Tenant Area and Tenant Ancillary Area on this floor.
- Floor allocation ratio - Floor Rentable Area divided by Floor Occupant Area.
Note that the BOMA Derived Areas fields can be displayed in SqFt or Meters.

View the Space's Details
When you select a space, you will see the Details display the following:
- Rentable Area - This displays the area that is auto-calculated using the BOMA Method set. Note: Administrators can replace a calculated Rentable Area with a manual value, for example the figure from a signed lease. Next to the Rentable Area field, click the Override
icon and enter the area. - Occupant Area - This is the space's area when its classification contributes to Occupant Area.
- Load Factor
Note that the Areas fields can be displayed in SqFt or Meters.

BOMA Calculations
Below details the BOMA Calculations.
Building Level
| Calculation | Formula |
|---|---|
| Load Factor (Method B) | Σ Floor Rentable Area ÷ Σ Occupant Area (all floors) |
| Building Allocation (Method A) | (Σ Floor Rentable Area + Σ Building Common Area) ÷ Σ Floor Rentable Area |
Floor Level
| Calculation | Formula |
|---|---|
|
Floor Rentable Area (BOMA Derived), Method B |
Interior Gross Area − Vertical Penetrations − Rentable Exclusions |
|
Floor Rentable Area (BOMA Derived), Method A |
Interior Gross Area − Vertical Penetrations − Rentable Exclusions − Building Common Area on that floor Building common area is allocated at the building level in Method A, so it is taken out of the floor figure. |
|
Occupant Area |
Tenant Area + Tenant Ancillary Area |
|
Floor allocation ratio (Method A only) |
Floor Rentable Area ÷ Floor Occupant Area |
Space Level
| Calculation | Formula |
|---|---|
| Rentable Area (Method B) |
Space Occupant Area × Load Factor |
| Rentable Area (Method A) |
Space Occupant Area × Floor allocation ratio × Building Allocation |
| Load Factor (informational, both methods) |
Space Rentable Area ÷ Space Occupant Area |
If a building has no floor rentable area to allocate, the Ratio and Load Factor are left blank rather than shown as zero.
Working Example
A two-floor building. Each floor has 10,000 ft² of Occupant Area. After removing vertical penetrations and rentable exclusions from interior gross area, Floor 1 has 12,000 ft² of BOMA rentable area, which includes a 1,150 ft² main lobby classified as Building Service. Floor 2 has 11,000 ft².
Method B - Single Load Factor
Σ Floor Rentable Area = 12,000 + 11,000 = 23,000 ft²
Σ Occupant Area = 10,000 + 10,000 = 20,000 ft²
Load Factor = 23,000 ÷ 20,000 = 1.15
A 1,000 ft² space on either floor: 1,000 × 1.15 = 1,150.0 ft²
Method A - Dual Ratios
Floor 1 rentable area after removing the lobby: 12,000 − 1,150 = 10,850 ft². Floor 2 stays at 11,000 ft².
Floor allocation ratio, Floor 1: 10,850 ÷ 10,000 = 1.0850
Floor allocation ratio, Floor 2: 11,000 ÷ 10,000 = 1.1000
Building Allocation: (10,850 + 11,000 + 1,150) ÷ (10,850 + 11,000) = 23,000 ÷ 21,850 = 1.0526
A 1,000 ft² space on Floor 1: 1,000 × 1.0850 × 1.0526 = 1,142.1 ft²
A 1,000 ft² space on Floor 2: 1,000 × 1.1000 × 1.0526 = 1,157.9 ft²
Comparison
| Method B | Method A | |
|---|---|---|
| 1,000 ft² space on Floor 1 |
1,150.0 ft² |
1,142.1 ft² |
| 1,000 ft² space on Floor 2 |
1,150.0 ft² |
1,157.9 ft² |
| Total across all spaces |
23,000 ft² |
23,000 ft² |
Both methods add up to the same building total. Method A shifts more of the cost to floors with more common area of their own, while Method B charges every space the same factor.
